# How do you set up a Michi method Pokemon binder?

By Al Davies · Updated November 10, 2026

**Short answer:** A Michi method binder treats a page, or a pair of facing pages, as one picture. You mix cards, art panels and empty pockets so the art runs across several pockets. Pick side-loading pages, plan the spread on paper, then fill the pockets.

## What is the Michi method?

The Michi method is a way to lay out a Pokemon binder so that a page looks like a display, not a grid of identical cards. Collectors who use it print or cut art panels the size of one or more pockets, and put them between cards.

The plan has three parts: cards, art panels that cover two or more pockets, and pockets left empty on purpose. The empty pockets give the page room to breathe.

- Cards sit in single pockets.
- Art panels cover 2, 4 or more pockets.
- Some pockets stay empty by design.
- A theme ties the spread together, such as one Pokemon or one color.

## Which binder works best for the Michi method?

Choose a side-loading binder. Its pockets open on the side, so a panel that covers two pockets does not slip out when you turn the page. See [how side-loading and top-loading pages differ](https://bindermint.com/guides/side-loading-binder-pages).

A 12-pocket page gives you more room to work with. Each page is 4 pockets wide and 3 tall, so a facing pair is 8 wide and 3 tall. A 9-pocket pair is 6 wide and 3 tall. For totals, read [what a full 12-pocket binder holds](https://bindermint.com/guides/how-many-cards-does-a-12-pocket-binder-hold).

| Binder page | Pockets per page | Pockets across a facing pair | Pockets in a pair |
| --- | --- | --- | --- |
| 9-pocket | 3 wide x 3 tall | 6 wide x 3 tall | 18 |
| 12-pocket | 4 wide x 3 tall | 8 wide x 3 tall | 24 |

## How do you plan a spread?

Plan on paper before any card goes into a pocket. A spread is small enough to sketch in a minute.

1. Pick the theme: one Pokemon, one set, one artist or one color.
2. Draw a grid of 24 boxes for a 12-pocket pair, or 18 for a 9-pocket pair.
3. Pick 1 or 2 anchor cards and mark their boxes.
4. Mark the boxes where an art panel covers 2 or 4 pockets.
5. Mark 2 to 4 boxes to leave empty.
6. Fill the remaining boxes with cards that fit the theme.

## What sizes do art panels need?

Figure: A 12-pocket facing pair

**Spread:** One spread can mix single cards, art panels and empty pockets.

A standard Pokemon card is 63 mm by 88 mm, which is about 2.5 by 3.5 inches. A panel for one pocket matches that size. A panel for two pockets side by side is twice as wide. Pocket sizes vary by brand, so measure one pocket in your own binder before you print a batch.

Ultra PRO sizes its standard pocket pages for a card that size, so a panel cut to card size slides in.

1 pocket: one card width x one card height 2 pockets side by side: two card widths x one card height 2 pockets stacked: one card width x two card heights 4 pockets (2 x 2): two card widths x two card heights ## Can you use a 9-pocket binder? Yes. A 9-pocket binder works, with fewer pockets to spread art across. A 3 by 3 page fits one anchor card in the middle with art panels around it. [Nine-pocket totals](https://bindermint.com/guides/how-many-cards-does-a-9-pocket-binder-hold) are in a separate guide. A top-loading binder can work, but panels that span pockets may not sit as neatly.

## How do you keep the plan and the collection in sync?

A themed binder moves cards out of set order, so a missing card is harder to spot. Keep a list of which card sits on which page and pocket. On a 9-pocket page, one BinderMint photo lists the cards on that page, so you can check a page again after you rearrange it.

Slide each card into a penny sleeve first. Here is [when sleeves and toploaders pay off](https://bindermint.com/guides/store-cards-sleeves-toploaders). A binder in set order needs [a different page plan](https://bindermint.com/guides/sort-pokemon-cards-in-a-binder).

**Tip:** Write the spread number in pencil on the first page, so you can find a card by theme.

Last checked 10 November 2026.

## Sources

- [9-Pocket Page for Standard Size Cards, Ultra PRO](https://www.ultrapro.com/products/9-pocket-page-for-standard-size-cards-35ct)
- [Creating a Binder Preview (with Michi Method), Elite Fourum collector forum](https://www.elitefourum.com/t/creating-a-binder-preview-with-michi-method/60453)

## Related

- [How to sort Pokemon cards in a binder](https://bindermint.com/guides/sort-pokemon-cards-in-a-binder)
- [Pokemon Retreat Cost: What It Means and How It Works](https://bindermint.com/guides/pokemon-retreat-cost)
- [Pokemon Set List in Order by Release Date](https://bindermint.com/guides/pokemon-set-list-in-order)
- [Pokemon TCG Coin Flip Rules: When You Flip a Coin](https://bindermint.com/guides/pokemon-tcg-coin-flip-rules)
- [What Is a Tera Pokemon Card? The Bench Rule Explained](https://bindermint.com/guides/what-is-a-pokemon-tera-card)
