# Pokemon card dimensions: the size chart

By Al Davies · Updated November 9, 2026

**Short answer:** A standard Pokemon card measures 2.5 by 3.5 inches, or 63.5 by 88.9 millimeters. Ultra PRO states that size on its toploader pages. The size is fixed, so the number you need when you shop is the card's thickness, not its width or height.

## Pokemon card dimensions at a glance

Figure: Card inside a toploader

**To scale:** The toploader is the same 3 by 4 inches for every rating; only thickness changes.

Ultra PRO makes toploaders for what it calls standard size cards. The sizes below come from its product pages and the date is the day we read them.

| Item | Size the maker states | What it holds |
| --- | --- | --- |
| Standard card | 2-1/2 by 3-1/2 inches (63.5 by 88.9 mm) | One card |
| Regular toploader | 3 by 4 inches, outer | Cards up to 35pt thick |
| Action Packed toploader | 3 by 4 inches, outer | Cards up to 55pt thick |
| Super thick toploader | 3 by 4 inches, outer; inside 2.75 by 3.88 by 0.138 inches | Cards up to 130pt thick |
| 9-pocket page | Pockets sized for 2-1/2 by 3-1/2 inch cards or smaller | Nine loose or sleeved cards |
| Toploader 4-pocket page | Pockets sized for toploaders up to 130pt | Four cards in toploaders |

## Why does width and height not decide what you buy?

Every row above uses the same 3 by 4 inch outer size for toploaders. What changes is the thickness rating on the pack, such as 35pt, 55pt or 130pt.

Ultra PRO also sells 3 by 4 inch toploaders with higher ratings for thicker cards. A thin common needs the 35pt kind. A card thicker than 35pt, such as a thick relic or jumbo-stock card, needs a higher number.

**Tip:** Read the 'pt' number on the pack before the inch size. The inch size is almost always 3 by 4.

## Check a card in four steps

Do this before you order holders for a whole box.

1. Pull one card from the pile and note whether it is already in a sleeve.
2. Find the thickness rating on the holder pack you plan to buy.
3. Slide the card, with its sleeve, into one test holder from a friend or a single pack.
4. If it jams or bows, move up one rating and test again.

## Which binder page fits which holder?

A 9-pocket page is made for bare or sleeved cards. Ultra PRO states its 9-pocket page holds standard cards of 2-1/2 by 3-1/2 inches or smaller. A toploader will not fit in it.

For toploaders, use a page cut for them. Ultra PRO's 4-pocket secure page holds toploaders up to 130pt and has a flap on each pocket. The [side-loading binder pages guide](https://bindermint.com/guides/side-loading-binder-pages) explains why side-loading pockets help with sleeved cards. Page counts are in [how many cards a 9-pocket binder holds](https://bindermint.com/guides/how-many-cards-does-a-9-pocket-binder-hold).

## Example: a box of mixed cards

A seller has 300 cards: mostly commons, 12 chase cards. The commons go in 9-pocket pages. The 12 chase cards each get a sleeve and a 35pt toploader. If three of the 12 are thicker than 35pt, those three need the 130pt toploader instead.

## What about sleeves?

Sleeve sizes differ by maker and style. The [how to store sports cards guide](https://bindermint.com/guides/store-cards-sleeves-toploaders) lists the penny sleeve and toploader specs from maker pages, and [how to store graded cards](https://bindermint.com/guides/how-to-store-graded-cards-slabs) covers slabs, which are a different size.

## Do you need to count your cards once they are sorted?

Once each card has a holder, a list tells you where it lives. BinderMint reads each card from a photo of a binder page, so you do not retype names. See [how to sort Pokemon cards in a binder](https://bindermint.com/guides/sort-pokemon-cards-in-a-binder) for a page plan.

## FAQ

### Are Japanese Pokemon cards a different size?

The maker pages we read do not give a separate Japanese size. Check the pack of any holder you buy against the card you have.

### Will a 35pt toploader fit a holo card?

It fits if the card is within the 35pt rating Ultra PRO states for its regular toploader. A thicker card needs a higher rating.

### What is the interior size of a thick toploader?

Ultra PRO lists 2.75 by 3.88 by 0.138 inches inside its 130pt toploader.

Last checked 9 November 2026.

## Sources

- [3 inch x 4 inch Clear Regular Toploaders, Ultra PRO](https://www.ultrapro.com/products/3-inch-x-4-inch-clear-regular-toploaders-25ct-for-standard-size-cards)
- [3 inch x 4 inch Clear Action Packed 55pt Toploaders, Ultra PRO](https://www.ultrapro.com/products/3-inch-x-4-inch-clear-action-packed-55pt-toploaders-25ct)
- [3 inch x 4 inch Super Thick 130pt Toploaders, Ultra PRO](https://www.ultrapro.com/products/3-inch-x-4-inch-super-thick-130pt-toploaders-10ct)
- [9-Pocket Page for Standard Size Cards, Ultra PRO](https://www.ultrapro.com/products/9-pocket-page-for-standard-size-cards-35ct)
- [Premium Series 4-Pocket Secure Pages for Toploaders, Ultra PRO](https://www.ultrapro.com/products/premium-series-4-pocket-secure-pages-100ct-for-toploaders)

## Related

- [Pokémon Regionals 2027: North America Dates and Venues](https://bindermint.com/guides/pokemon-regionals-2027)
- [Pokemon Regulation Marks 2026: H, I and J Are Standard Legal](https://bindermint.com/guides/pokemon-regulation-marks-standard-rotation)
- [Pokemon Retreat Cost: What It Means and How It Works](https://bindermint.com/guides/pokemon-retreat-cost)
- [Pokemon Set List in Order by Release Date](https://bindermint.com/guides/pokemon-set-list-in-order)
- [What Is a Pokémon LV.X Card?](https://bindermint.com/guides/what-is-a-pokemon-lv-x-card)
