How do you grade Pokemon cards at home?
Short answer: You cannot give a Pokemon card an official grade at home, because only a grading company can do that. You can check the same four things they judge, centering, corners, edges and surface, to decide which cards are worth sending in.
What do you need to check a card?
Use a bright, even light and a clean flat surface. A ruler marked in millimeters helps for borders. A small magnifier helps for corners. Handle cards by the edges, and keep them in a soft sleeve between checks.
How do you check centering?
Measure the border on the left and right of the front, then the top and bottom. Write each pair as a ratio. A card with a 3 mm border on one side and 2 mm on the other is about 60/40.
CGC's published scale gives a feel for the numbers. Its Gem Mint 10 allows front centering up to about 55/45, with the back at 75/25 or better. Its 60/40 front and 90/10 back limits for a Mint 9 are listed for sports and non-sports cards only. For TCG cards such as Pokemon, a CGC Mint 9 may have only a few minor manufacturing or handling defects. Other companies use their own limits, so look up the one you plan to use. A step by step guide is in how to check Pokemon card centering before grading.
| CGC grade | Front centering | Back centering |
|---|---|---|
| Gem Mint 10 | About 55/45 or better | 75/25 or better |
How do you check corners, edges and surface?
Look at each of the four corners for fraying or a soft point. Run your eye along the edges for white chips, which show most on dark borders. Then tilt the card under a lamp to see scratches, dents or print spots that a flat look hides.
- Corners: sharp tips, no fraying or rounding.
- Edges: no white chips or rough spots.
- Surface: no scratches, dents or print spots, and full gloss.
- Borders: the same width on both sides.
What does a top grade need?
CGC describes a Gem Mint 10 as having corners that are perfect to the naked eye and a surface with no print spots and perfect gloss. Its Mint 9 has four sharp corners with only minor wear, and slight flaws on the edges may show. Its Pristine 10 asks for a virtually flawless card to the naked eye, with 50/50 centering.
What is the next step after your check?
Sort cards into three piles: clearly clean, unsure and clearly worn. Only the first pile is worth looking up further. Rare prints such as secret rares often get the closest look, so see what a Pokemon secret rare card is if you are not sure which ones you have. Is it worth grading a card shows how to weigh the fee against the likely gain.
How can you keep your results?
Write down what you measured for each card. A notebook works, and our list of free card collection trackers shows other options. BinderMint is a card catalog app. Free for your first 99 cards. No credit card needed.
FAQ
Can you grade Pokemon cards yourself?
You can judge condition yourself, but only a grading company can assign an official grade.
What is the most important thing to check first?
Centering, because it is the one part you can measure with a ruler.
How centered must a card be for a CGC Gem Mint 10?
Up to about 55/45 on the front and 75/25 or better on the back, per CGC's scale.
Why tilt the card under a light?
Scratches, dents and print spots on the surface often show only at an angle.
Last checked 11 November 2026.