How to check Pokemon card centering before you grade
Short answer: To check Pokemon card centering, measure the left and right borders, then the top and bottom, and turn each pair into a ratio. PSA's standards list about 55/45 to 60/40 on the front and 75/25 on the back for a Gem Mint 10. Check both sides before you submit.
How do you do the ratio math?
Add the two border widths. Divide the bigger width by the total and multiply by 100. That gives the first number; 100 minus it gives the second. For 3 mm and 2 mm, the total is 5, and 3 divided by 5 is 60, so the ratio is 60/40.
Which tools make it easier?
A clear ruler marked in millimeters works. A centering overlay or a phone photo you zoom into also works. Whatever you use, keep the card flat and look straight down so the angle does not trick you.
See BGS subgrades and black labels.
Why do full-art cards make centering harder?
Full-art cards have art that runs to a thin border, or a border with the same color as the art. Find the edge of the printed frame line, not the edge of the art, and measure from there.
What centering does PSA allow for a 10?
PSA's grading standards page says a Gem Mint 10 should not exceed about 55/45 to 60/40 on the front and 75/25 on the back.
Many collectors aim for 55/45 on the front as the safe target. Treat any tighter claim as community opinion, not PSA policy.
See PSA grading scale explained.
Does PSA check centering on the back too?
Yes. PSA lists a back limit of about 75/25 for a Gem Mint 10. The back limit is looser than the front, but a badly shifted back can still lower the grade. Flip the card and measure the blue border the same way you measured the front.
What about Beckett and other graders?
Beckett scores centering as one of four subgrades. A BGS Pristine 10 needs 50/50 centering on the front. Check Beckett's grading standards page before you submit.
See our guide to PSA vs BGS vs SGC for how the three companies differ.
What mistakes throw off a centering check?
Measuring at an angle is the biggest one. A photo taken from the side makes one border look wider. A worn ruler edge or measuring from a rounded corner also causes errors. Measure in the middle of each border, not near the corners.
Should you check centering on a card still in a sleeve?
You can, if the sleeve is clear and flat. A cloudy or scratched sleeve hides the edge of the border. For a close call, slide the card out on a clean, soft surface and measure it bare.
What should you do with an off-center card?
Keep it raw in your binder, or grade it only if the card is worth it at a lower grade. Off-center cards can still look great on a page.
See is it worth grading a card.
What order should you check things in?
Centering first, because you can measure it fast. Then corners, edges and surface under a bright light. Only cards that pass all four go in the submit stack.
See how to submit cards to PSA.
Apps that estimate a grade from a photo are reviewed in the AI card grading app guide.
FAQ
What centering does PSA allow for a 10?
About 55/45 to 60/40 front and 75/25 back, per PSA.
What does 60/40 mean?
One border is 60 percent of the two widths added together.
Does the back matter?
Yes. PSA lists a separate back limit.
Can a phone photo check centering?
Yes, if you shoot straight on and zoom in.
What does Beckett need for a Pristine 10?
About 50/50 on the front, per Beckett's grading standards.
Last checked 9 November 2026.